This screw is used to attach the grips to the grip frame of markers of the brands: Luxe (TM40, X, ICE, OLED, 2.0 and older), Shocker (ERA, AMP, XLS and RSX), GOG (eNMEy, eNVy and older), AKA markers (depending on the thickness of the grips) and Smart Parts markers (depending on the thickness of the grips). Please compare with the respective manual of the marker.  

 Factory lubricant for all DLX Luxe, Shocker, GOG paintball markers.*Use of other lubricants will result in reduced performance.  

 Factory lubricant for all DLX Luxe, Shocker, GOG paintball markers.*Use of other lubricants will result in reduced performance.  

4 thumbscrews for the body of the Shocker, for quick opening without tools.Compatible with: Shocker Sport / 4x4 / Turbo  

The cap covers the switch of the turboboard. Required on almost all tournaments.Color: BlackCompatible with: Shocker Sport / 4x4 / Turbo  

Grip kits designed for your Shocker AMP - straight from the factory. With unparalleled fit and finish these grips are designed to make your Shocker AMP stand out from the crowd! The unique grip design allows all diagnostic holes to be heard, as well as protecting the bottom edge of the regulator. A unique half moon built into the back of the regulator grip cover matches the factory milling and keeps the grip from rotating even under the harshest conditions. Grab your set today in one of 5 awesome colors.  

Shocker Classic Conversion Kit The original Shocker ushered in the age of electronic paintball and now the legend has come full circle. Through progressive advancements each Shocker generation has become smaller, lighter and faster than the one before. the circle is now complete... The Shocker has become mechanical!The new Shocker AMP CC upgrade allows to rebuild an existing Shocker AMP to a mechanical operation system.This way all benefits of the existing AMP will be combined with the new benefits of the mechanical operation. The Shocker CC provides the smoothness and efficiency found in the ultra-light and compact Shocker AMP and strips away the electronics, replacing them with a purely mechanical controle system featuring a cam-actuated pilot valve. The result is a cutting edge paintball marker with a trigger pull so short and light that it matches its electronic cousins while diving into the resurgent world of mechanical tournament paintball. Special features:- precision trigger- roller bearing lever- roller actuated pilot valve - adjustable ASA- hose free - 45 grip compatible - Spool Valve - highly efficient - low pressure - carry caseColors: BLACK  

[SHK416] The Shocker AMP Solenoid/Vision Board is located on the body of the AMP. The Solenoid and the Vision System plug into it.Together with the Main Board this Solenoid/Vision Board enables the wireless connection between the gripframe and the body.  

Original Shocker AMP spare part: bolt insert complete [SHK459]  

Shocker AMP Main Board SHK417This is the main board for the Shocker AMP. This board is the export version (all fire modes)The acquisition and possession is permitted in Germany, but the installation and use may only take place abroad.Check you local law if you may use all fire modes.  

The Shocker AMP stock grips in black  

The Shocker AMP Front grip rubber grips in black  

The Shocker AMP Front grip rubber grips in red  

Shocker AMP Regulator Base 2.0 SHK226The regulator base 2.0 as a spare part for the Vertical Regulator of the Shocker AMP and XLS.  

complete Shocker CVO Valve  

The ball detents in the Shocker ERA, AMP, XLS and RSX are engineered for incredibly long life, and will likely never wear out. However, if your looking for piece of mind, or have a tendency to loose parts this detent kit will give you a full replacement set for your Shocker AMP. XLS or RSX.  

Whether you just want to have a spare for everything, or your replacing a missing screw or pin, this kit has everything you need to replace each piece of hardware on your Shocker ERA and AMP. All fasteners used to secure the various sub-assemblies of the Shocker ERA and AMP are provided in stainless steel to prevent corrosion and deliver excellent clamping force without stripping  

Original Shocker ERA/AMP spare part QEV without seal [LUXQEV]  

Original Shocker ERA/AMP spare part: SHK447 trigger frame receiver  

Original Shocker ERA/AMP spare part: SHK444 air transfer tube  

Shocker ERA/AMP spare part: QEV105 QEV seal This is the QEV seal for the Shocker ERA or Shocker AMP.  

Factory solenoid for Shocker ERA/AMP markers. [SOL304]  

This is a full set of eye wires, plug, and sensors to replace the vision system in your Shocker ERA/AMP. Wether you have damaged a sensor, or torn a wire, these will get you back on the field ASAP! The Shocker ERA/AMP vision sensors are mounted on micro-boards to help with cleaning, alignment and installation. The thicker than average eye wire gauge ensure they are durable yet supple enough to make installation a snap.