Products from Shocker Paintball

Close filters
 
from to
from to
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
1 From 3
No results were found for the filter!
Banner "Shocker AMP"
Banner "Shocker AMP"
Shocker banner - High quality cloth banner - Metal inserts for flexible mounting - colourfast, washable - can be used inside and outside - 210 g / m² decorative fabric - B1 flame retardant (DIN 4102, part 1) Dimensions: Approx. 120 cm x...
24.90€ *
Banner "SP"
Banner "SP"
Shocker banner - High quality cloth banner - Metal inserts for flexible mounting - colourfast, washable - can be used inside and outside - 210 g / m² decorative fabric - B1 flame retardant (DIN 4102, part 1) Dimensions: Approx. 120 cm x...
24.90€ *
Poster "Shocker CVO"
Poster "Shocker CVO"
Nice poster, printed on professional paper Measurements: 70cm height x 50 cm width
3.90€ *
Poster "Shocker XLS"
Poster "Shocker XLS"
Nice poster, printed on professional paper Measurements: 70cm height x 50 cm width
3.90€ *
Regular Service Check - DLX LUXE - SHOCKER RSX / XLS / CVO
Regular Service Check - DLX LUXE - SHOCKER RSX...
If your paintball marker isn't working properly or is leaking air, then the GOGeurope.com Service Check is just the thing for him. Specially trained technicians will take care of your marker and get it up and running again with original...
49.00€ *
Shocker 4x4 Thumbwheel Screw Kit
Shocker 4x4 Thumbwheel Screw Kit
4 thumbscrews for the body of the Shocker, for quick opening without tools. Compatible with: Shocker Sport / 4x4 / Turbo
9.90€ *
Shocker 4x4 tournament cap, black
Shocker 4x4 tournament cap, black
The cap covers the switch of the turboboard. Required on almost all tournaments. Color: Black Compatible with: Shocker Sport / 4x4 / Turbo
24.90€ *
Shocker AMP Grip Kits
Shocker AMP Grip Kits
Grip kits designed for your Shocker AMP - straight from the factory. With unparalleled fit and finish these grips are designed to make your Shocker AMP stand out from the crowd! The unique grip design allows all diagnostic holes to be...
39.95€ *
Shocker AMP Screw Kit
Shocker AMP Screw Kit
Whether you just want to have a spare for everything, or your replacing a missing screw or pin, this kit has everything you need to replace each piece of hardware on your Shocker AMP. All fasteners used to secure the various...
10.95€ *
Shocker AMP Seal Kit
Shocker AMP Seal Kit
Whether you just want to have a spare for everything, or your replacing a damaged o-ring or two, this kit has a full rebuild for your Shocker AMP. Factory o-rings are provided in specific materials and durometers to achieve maximum...
15.95€ *
Shocker AMP Solenoid/Vision Board
Shocker AMP Solenoid/Vision Board
The Shocker AMP Solenoid/Vision Board is located on the body of the AMP. The Solenoid and the Vision System plug into it. Together with the Main Board this Solenoid/Vision Board enables the wireless connection between the gripframe and...
24.95€ *
Shocker AMP Spare Part: Main Board
Shocker AMP Spare Part: Main Board
Shocker AMP Main Board SHK417 This is the main board for the Shocker AMP. This board is the export version (all fire modes) The acquisition and possession is permitted in Germany, but the installation and use may only take place abroad....
59.95€ *
Shocker AMP Spare Part: Solenoid
Shocker AMP Spare Part: Solenoid
Factory solenoid for Shocker AMP markers.
89.95€ *
Shocker AMP Spare Part: Vision Harness
Shocker AMP Spare Part: Vision Harness
This is a full set of eye wires, plug, and sensors to replace the vision system in your Shocker AMP. Wether you have damaged a sensor, or torn a wire, these will get you back on the field ASAP! The Shocker AMP vision sensors are mounted...
19.95€ *
Shocker AMP Stock Grips
Shocker AMP Stock Grips
The Shocker AMP stock grips in black
24.95€ *
Shocker AMP VReg Grips
Shocker AMP VReg Grips
The Shocker AMP Front grip rubber grips in black
19.95€ *
Shocker AMP/XLS Spare Part: Regulator Base
Shocker AMP/XLS Spare Part: Regulator Base
Shocker AMP Regulator Base SHK226 The regulator base 2.0 as a spare part for the Vertical Regulator of the Shocker AMP and XLS.
12.95€ *
Shocker CC, AMP mechanical conversion kit
Shocker CC, AMP mechanical conversion kit
Shocker Classic Conversion Kit The original Shocker ushered in the age of electronic paintball and now the legend has come full circle. Through progressive advancements each Shocker generation has become smaller, lighter and faster than...
214.95€ *
Shocker CVO valve complete
Shocker CVO valve complete
complete Shocker CVO Valve
124.95€ *
Shocker Detent Kit
Shocker Detent Kit
The ball detents in the Shocker AMP, XLS and RSX are engineered for incredibly long life, and will likely never wear out. However, if your looking for piece of mind, or have a tendency to loose parts this detent kit will give you a full...
10.95€ *
Shocker NXT Gripframe Screw
Shocker NXT Gripframe Screw
This screw connects the gripframe to the body of the marker. Fits Shocker NXT
1.90€ *
Shocker NXT/SFT Screw Kit
Shocker NXT/SFT Screw Kit
Full set of screws that are used in the Shocker NXT and Shocker SFT. Compatible with: Shocker SFT, Shocker NXT
19.90€ *
Shocker RSX Accent Kit
Shocker RSX Accent Kit
These custom accent kits for the Shocker RSX allow you to personalize your marker to fit your style. Each kit is the same high quality anodization and fit as your original parts guaranteed to fit without modification. The kit contains: -...
99.95€ *
Shocker RSX Custom Tech Mat
Shocker RSX Custom Tech Mat
This neoprene mat is perfect for working on your Shocker XLS or RSX without scratching the body on your work surface. The back is textured and grippy to keep it in place during even the most intense cleaning sessions. Aside from its...
24.95€ *
1 From 3
Viewed