Close filters
 
  •  
  •  
from to
from to
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
1 From 2
No results were found for the filter!
GOG GR33SE 1 oz. jar
GOG GR33SE 1 oz. jar
 Factory lubricant for all DLX Luxe, Shocker, GOG paintball markers. *Use of other lubricants will result in reduced performance.
Content 0.03 liter (431.67€ / 1 liter)
12.95€ *
GOG GR33SE 2 oz. jar
GOG GR33SE 2 oz. jar
 Factory lubricant for all DLX Luxe, Shocker, GOG paintball markers. *Use of other lubricants will result in reduced performance.
Content 0.06 liter (332.50€ / 1 liter)
19.95€ *
Shocker AMP Grip Kits
Shocker AMP Grip Kits
Grip kits designed for your Shocker AMP - straight from the factory. With unparalleled fit and finish these grips are designed to make your Shocker AMP stand out from the crowd! The unique grip design allows all diagnostic holes to be...
39.95€ *
Shocker AMP Screw Kit
Shocker AMP Screw Kit
Whether you just want to have a spare for everything, or your replacing a missing screw or pin, this kit has everything you need to replace each piece of hardware on your Shocker AMP. All fasteners used to secure the various...
10.95€ *
Shocker AMP Seal Kit
Shocker AMP Seal Kit
Whether you just want to have a spare for everything, or your replacing a damaged o-ring or two, this kit has a full rebuild for your Shocker AMP. Factory o-rings are provided in specific materials and durometers to achieve maximum...
15.95€ *
Shocker AMP Solenoid/Vision Board
Shocker AMP Solenoid/Vision Board
The Shocker AMP Solenoid/Vision Board is located on the body of the AMP. The Solenoid and the Vision System plug into it. Together with the Main Board this Solenoid/Vision Board enables the wireless connection between the gripframe and...
24.95€ *
Shocker AMP Spare Part: Solenoid
Shocker AMP Spare Part: Solenoid
Factory solenoid for Shocker AMP markers.
89.95€ *
Shocker AMP Spare Part: Vision Harness
Shocker AMP Spare Part: Vision Harness
This is a full set of eye wires, plug, and sensors to replace the vision system in your Shocker AMP. Wether you have damaged a sensor, or torn a wire, these will get you back on the field ASAP! The Shocker AMP vision sensors are mounted...
19.95€ *
Shocker AMP Stock Grips
Shocker AMP Stock Grips
The Shocker AMP stock grips in black
24.95€ *
Shocker AMP VReg Grips
Shocker AMP VReg Grips
The Shocker AMP Front grip rubber grips in black
19.95€ *
Shocker AMP/XLS Spare Part: Regulator Base
Shocker AMP/XLS Spare Part: Regulator Base
Shocker AMP Regulator Base SHK226 The regulator base 2.0 as a spare part for the Vertical Regulator of the Shocker AMP and XLS.
12.95€ *
Shocker CVO valve complete
Shocker CVO valve complete
complete Shocker CVO Valve
124.95€ *
Shocker Detent Kit
Shocker Detent Kit
The ball detents in the Shocker AMP, XLS and RSX are engineered for incredibly long life, and will likely never wear out. However, if your looking for piece of mind, or have a tendency to loose parts this detent kit will give you a full...
10.95€ *
Shocker RSX Accent Kit
Shocker RSX Accent Kit
These custom accent kits for the Shocker RSX allow you to personalize your marker to fit your style. Each kit is the same high quality anodization and fit as your original parts guaranteed to fit without modification. The kit contains: -...
99.95€ *
Shocker RSX Custom Tech Mat
Shocker RSX Custom Tech Mat
This neoprene mat is perfect for working on your Shocker XLS or RSX without scratching the body on your work surface. The back is textured and grippy to keep it in place during even the most intense cleaning sessions. Aside from its...
24.95€ *
Shocker RSX Spare Part: Regulator Base
Shocker RSX Spare Part: Regulator Base
Shocker RSX Regulator Base SHK126 The regulator base as a spare part for the Vertical Regulator of the Shocker RSX.
9.95€ *
Shocker RSX Spare Part: Regulator Piston
Shocker RSX Spare Part: Regulator Piston
Shocker RSX Regulator Piston VRG105 The Shocker RSX Regulator Piston as a replacement for the Vertical Regulator of the Shocker RSX.
9.95€ *
Shocker Screen Cover & Power Button Kit
Shocker Screen Cover & Power Button Kit
This is the improved display cover of the Shocker AMP including the power button. Also compatible with XLS and RSX models, so it can be used as an upgrade to better protect the on/off switch from the elements.
9.95€ *
Shocker Snap Back Hat
Shocker Snap Back Hat
This clean snap back hat is custom embroidered with the Shocker logo and is one size fits all. Keep the sun out of your eyes on grand stands and look great doing it - all while showing your love for the best marker in the game - Shocker!
24.95€ *
Shocker Spare Part: Feed Tube Lever Set
Shocker Spare Part: Feed Tube Lever Set
The feed tube lever for the Shocker AMP, XLS and RSX This spare part is the complete feed tube lever assembly for the Shocker consisting of: SSC006 OB9004 QLK206 QLK205 SHK133
19.95€ *
Shocker Spare Part: OLED Board
Shocker Spare Part: OLED Board
SmartParts Shocker OLED Board SHK118 The high-quality Oled display of the Shocker XLS and RSX. All the Shocker XLS or RSX settings can be read via the easy-to-read display. Easy installation through plug and play.
19.95€ *
Shocker Spare Part: Piston Seat
Shocker Spare Part: Piston Seat
Shocker Vertical Regulator Factory part: VRG106 VRG Piston Seat The seat is used within the piston as main seal area. If signs of wear are visible it is advised to change the seat. Insert it with the mushroom head first.
1.50€ *
Shocker Spare Part: Pressure Relief Valve
Shocker Spare Part: Pressure Relief Valve
This is the pressure relief valve which is installed in the Vertical Regulator of the Shocker AMP, XLS and RSX. This spare parts kit for the Shocker consists of: VRG107 SPL035 SHK130 SHK128
9.95€ *
Shocker Thumbwheel Feedneck Screw
Shocker Thumbwheel Feedneck Screw
Grab this thumbscrew for your Shocker feed tube and make hopper adjustments even easier. This screw replaces your factory upper screw - SSC006 and allows you to clamp down on your hopper even tighter without the use of tools!
9.95€ *
1 From 2
Viewed